Tel: +1300 766 764  
Cart $0.00 0
Home8004 IAPC

8004 IAPC

TCA Certified

The unit is approved for use under the IAP and regulatory programs

Greater Road Access

Under the IAP you may have access to restricted roads with heavier loads

Australian Designed/Built

Uniquely suited for the Transport Certification Australia (TCA) applications

The 8004 IAPC model is a BlackBox Control hallmark as one of the few providers of TCA Certified telematics in Australia. The Intelligent Access Program (IAP) is a national program developed in partnership with all Australian road agencies. It uses tracking technology to remotely monitor where, when, and how higher mass/oversize vehicles are being operated on the road network. Under the Heavy Vehicle National Law (HVNL), IAP can be imposed as a condition of a permit or notice by a road jurisdiction manager, as IAP applications do differ between states and territories. Some TCA programs permit your vehicle to carry higher mass on approved roads based on IAP logistics saving your business time, resources and money. The 8004 sees regular incremental updates to support TCA regulations and compliance. Designed to withstand Australia’s harshest conditions the 8004 is the ultimate tracking solution for your business. The 8004 IAPC addresses a need for an IAP device as well as the commercial benefits used in vehicle tracking units.

Supply Voltage 12-24VDC
Supply Current (max) <1A Transmitting, <300mA in Standby, <50mA in Sleep Mode
Internal Battery Approx life expectancy ~ 5 years subject to configuration
Recording Interval Configurable, range: 1 sec – 3600 seconds
Power hold time Configurable, range: 1 min – 999 minutes
Input/Output Ports
Direct hard inputs 4, configurable as along or digital 100k input impedance
Serial Ports 2 x RS-232, 1 x J1708/RS-485 (configurable)
Outputs 1 x aux power output
Storage Capacity >100,000 position reports (>69 days at std configuration)
Storage Medium Non-volatile FLASH RAM
GPS Sensitivity -159dBm (tracking), -148dBm (acquisition)
GPS Accuracy 2.5m CEP 50
Frequency Ranges Band class I: Tx 1920-1980MHz

Rx 2110-2170MHz

Band Class V:Tx 824-849Mhz

Rx 869-894MHz

Transmit Power Class 3 (+24dBm)
Receive Sensitivity Band Class I: -109dBm

Band Class V: -110dBm

Construction Extruded Aluminium Case
Dimensions 151mm (L) X 35mm (H) x 103mm (W)
Weight 455g
Operating Temperature -10°C ~ +60°C


Book a live demo with our experienced staff today!
Book a demo


Check to see if this unit can give you coverage throughout Australia.