8002C IAP
8002C IAP
TCA Certified
The unit is approved for use under the IAP and regulatory programs
Greater Road Access
Under the IAP you may have access to restricted roads with heavier loads
Australian Designed/Built
Uniquely suited for the Transport Certification Australia (TCA) applications
The 8002C IAP model is a BlackBox Control hallmark as one of the few providers of TCA Certified telematics in Australia. The Intelligent Access Program (IAP) is a national program developed in partnership with all Australian road agencies. It uses tracking technology to remotely monitor where, when, and how higher mass/oversize vehicles are being operated on the road network. Under the Heavy Vehicle National Law (HVNL), IAP can be imposed as a condition of a permit or notice by a road jurisdiction manager, as IAP applications do differ between states and territories. Some TCA programs permit your vehicle to carry higher mass on approved roads based on IAP logistics saving your business time, resources and money. The 8002 sees regular incremental updates to support TCA regulations and compliance. Designed to withstand Australia’s harshest conditions the 8002 is the ultimate tracking solution for your business. The 8002C IAP addresses a need for an IAP device as well as the commercial benefits used in vehicle tracking units.
Specifications
| Electrical | |
| Supply Voltage | 12-24VDC |
| Supply Current (max) | <1A Transmitting, <300mA in Standby, <50mA in Sleep Mode |
| Internal Battery | Approx life expectancy ~ 5 years subject to configuration |
| Operational | |
| Recording Interval | Configurable, range: 1 sec – 3600 seconds |
| Power hold time | Configurable, range: 1 min – 999 minutes |
| Input/Output Ports | |
| Direct hard inputs | 4, configurable as along or digital 100k input impedance |
| Serial Ports | 2 x RS-232, 1 x J1708/RS-485 (configurable) |
| Outputs | 1 x aux power output |
| Storage Capacity | >100,000 position reports (>69 days at std configuration) |
| Storage Medium | Non-volatile FLASH RAM |
| GPS Sensitivity | -159dBm (tracking), -148dBm (acquisition) |
| GPS Accuracy | 2.5m CEP 50 |
| RF/Cellular | |
| Frequency Ranges | Band class I: Tx 1920-1980MHz
Rx 2110-2170MHz Band Class V:Tx 824-849Mhz Rx 869-894MHz |
| Transmit Power | Class 3 (+24dBm) |
| Receive Sensitivity | Band Class I: -109dBm
Band Class V: -110dBm |
| Mechanical | |
| Construction | Extruded Aluminium Case |
| Dimensions | 151mm (L) X 35mm (H) x 103mm (W) |
| Weight | 455g |
| Environmental | |
| Operating Temperature | -10°C ~ +60°C |